Vertical shaft compound crusher adopts a vertical shaft, which is equipped with impact plate and hammer plate. The machine can be either impact crushing or hammer crushing, which combines the characteristics and advantages of two kinds of crushing.
Features of vertical shaft compound crusher
The vertical shaft compound crusher has two crushing working principle, with the features of large crushing ration, fine and uniform particle size. It can break dozens of centimeters of large stones to 5mm or less at a time. Luoyang Dahua vertical compound crusher is mainly used for crushing fragile materials, such as limestone, dolomite, power plant, steel mill cement crushing, etc. In Guangxi, Guizhou Province and other places, it is used to make sand. The company compound crusher adopts the upper transmission mode, when the temperature of the broken material is higher than 75°, it is recommended to install cold water chassis. In addition, in rainy season, when the water content of the material is relatively large, the lining board of the machine cover is easy to stick to the material. It is recommended to check the lining board of the machine cover more in rainy season, so as not to break down the equipment and affect the production.
PFL vertical shaft compound crusher
Model | Max. Feed Size(mm) | Discharge Size(mm) | Mainshaft Speed(r/min) | Capacity(t/h) | Power(kw) | Dimension (mm) |
PFL-750Ⅲ | ≤100 | ≤3,70-90% | 800-1350 | 8 -20 | 45 | 2370×1150×1300 |
PFL-1000Ⅲ | ≤120 | ≤3,70-90% | 650-980 | 15-30 | 55 | 2600×1420×1520 |
PFL-1250Ⅲ | ≤150 | ≤3,70-90% | 510-770 | 30-45 | 90 | 3070×1690×1660 |
PFL-1500Ⅲ | ≤180 | ≤3,70-90% | 430-640 | 50-70 | 132 | 3390×2050×2030 |
ⅢⅩ | (3392×2200×2180) | |||||
PFL-1750Ⅲ | ≤200 | ≤3,70-90% | 420-540 | 70-100 | 160 | 3820×2360×2080 |
ⅢⅩ | (3720×2360×2280) | |||||
PFL-2000Ⅲ | ≤220 | ≤3,70-90% | 360-500 | 90-120 | 200 | 4080×2610×2180 |
PFL-2300Ⅲ | ≤240 | ≤3,70-90% | 330-450 | 120-160 | 250 | 4472×2930×2554 |
PFL-2500Ⅲ | ≤240 | ≤3,70-90% | 300-420 | 160-200 | 355 | 5472×3430×3054 |