JC Series Jaw Crusher

Max. Feed Size: 720-1360 (mm)
Feed Opening Size:
100×850,1250×950,1400×1070,1600×1200,2100×1600（mm）
Application Fields: metallurgy, mining, chemical, cement, construction, etc.
Applied Material: ore with compression strength less than 300Mpa, rock, slag, etc.

Get Price > Leave Message >

Tel.: +86-379-62669977 E-Mail: lydhchina@huazn.com

Overview

JC Series Jaw Crushers are new type ones developed based on the introduction and absorption of US and Europe technologies on crushers. They are the preferred primary crushers for any kinds of rocks.

Product Features

1. “V” type of crushing chamber, the throughput capacity will be increased by 15-20% compared with the normal crushing chamber.

2. The discharge opening applies the hydraulic adjusting unit, the optimized chamber and motion parameter make the product have greater through capacity for same clearance.

3. The wedge adjustment for CSS achieves infinite adjustment, which is quick and convenient.

4. Optimal design of kinematics parameter and crushing chamber increase processing capacity and crushing performance.

Working Principle

Electrical motor drives the belt wheel to make the swing jaw move following the specific track by eccentric shaft. After the materials enter into the crushing chamber, they are crushed between the two jaw plates by impacting, bending, and striking, and then discharged from the discharge opening.

Technical Parameters

Model	Feed Opening Size(mm)	Max. Feed Size（mm）	Discharge Opening Size（mm）/Capacity（t/h）															Power（kw）
			40	50	60	70	80	90	100	125	150	175	200	225	250	275	300
JC80	800×510	430	50	55	80	90	110	120	135	170	200	240						75
			70	85	100	125	145	170	185	240	280	330
JC90	910×630	500		80	100	120	140	160	180	210	260	300						90
				110	120	140	170	200	220	280	330	360
JC100	1000×760	640				130	160	180	200	235	280	330	390					110
						190	200	225	250	310	370	420	520
JC110	1100×850	720				180	200	220	245	300	350	400	460					110
						240	265	295	320	385	455	520	590
JC125	1250×950	810							270	325	385	445	500	560	620			160
									360	430	505	580	650	725	800
JC130	1250×110	940							330	360	440	500	555	600	670	730		185
									400	450	530	610	700	780	850	900
JC140	1400×1070	910								380	465	530	580	650	710	760		200
										470	555	640	725	815	900	985
JC160	1600×1200	1020									490	550	635	710	780	855	930	250
											640	730	825	920	1010	1105	1200
JC1613	1600×1300	1110									530	600	680	750	850	910	960	450
											680	760	870	960	1100	1200	1300
JC2012	2000×1200	1020									600	670	750	830	950	1050	1150	355
											730	900	1030	1150	1220	1300	1400
JC180	1800×1500	1300										700	810	930	1000	1080	1200	355
												1000	1150	1300	1450	1600	1800
JC200	2000×1500	1300										750	850	960	1050	1150	1300	400
												1100	1280	1500	1650	1850	2000